Saddles

Shorter—Narrower—Lighter—Faster. The 612-R Carbon offers more performance based ergonomics from 125g. The raised rear gives more grip and better power transmission. A big advantage on straight roads and especially uphill. The stronger narrower mid-section and the narrow saddle nose gives more legroom. The proven SQlab ERGOWAVE form relieves the soft tissue area and prevents energy-consuming bad posture. The saddle shell is weight and flex optimized down to the last detail. More longitudinal stiffness and perfectly coordinated material flex to the side mean more comfort with less weight at the same time. The cover is extremely light but also abrasion-resistant and non-slip. The padding is closed-cell and strongly minimized. The comfort comes from the shape and the flex behavior between rail, shell and foam, which is coordinated as an overall system.

- I-Beam: lightweight fiber composite single rail integrated into base - Super low profile for strength and clean aesthetics - Minimal padding with 1pc embossed Kevlar for additional grip and durability - Requires SDG I-Beam specific seatpost

- comfort, pressure relief groove on top - Synthetic top with Kevlar sides, or microfiber with Cordura sides, generous foam padding - Traditional railed saddle with nylon/carbon base. Nose and tail guards

The Silverado is one of WTB’s most iconic and revered saddle shapes. Lightweight and slim, the design oozes speed while proving to be incredibly comfortable. Ride a Silverado and you’ll quickly know what everyone’s raving about. - Long, tapered nose and flatter platform provide ample real estate for shifting positions - Optimized padding-to-weight ratio make the Silverado a hit across all disciplines, including road - Titanium rails

- AirForm Foam Padding - Dampening Rail Suspension System - Steel Rails - Water Resistant Vinyl Cover - Dimensions: 163 x 279mm

Based on the popular ST Core Prime shape comes the all-new ST Gel. The ST Gel is designed for a more cost-conscious rider. The orthopedic comfort foam provides a high level of support and comfort over long distances. The gel pads guarantee additional comfort around the sit bones. The relief surfaces are gender specific.

- ComfortRide dual-density foam offers plush support - Vacuum sealed water-resistant SVT Cover - NiteSite reflective accents - FullCut Relief Zone

Selle Royal's Memory Foam Seat Cover combines the immediate comfort of Slow Fit Foam with a perfectly ergonomic surface shape. Slow Fit Foam provides superior comfort by molding itself to fit the shape of the body's contact points, creating a more uniform pressure distribution while maintaining effective support. It's ideal for increased comfort on every type of bicycle. - Dimensions: 248mm long x 220mm wide - Weight: 289g

The Volt is our most popular mountain saddle. Shaped for speed and comfort, time tested and proven, the Volt makes for an incredibly versatile saddle that has gained endless acclaim among riders. - Medium padding thickness and subtle curves make the Volt our most popular mountain saddle - An upward curved tail and gentle drop to the nose provide something to push against while pedaling - Cromoly rails

LIGHT GEL The particular layer of "Light Gel" inside the padding ensures great comfort, even over long distances. SUPERFLOW The Superflow central cutout allows to adequately discharge pressure from the perineal area. 155mm WIDE The increased width of the saddle (155mm) ensures greater support to the ischial bones and allows you to satisfy pedaling needs. - Designed to meet the growing demand for comfortable and ergonomic saddles - Fibra-tek is Selle Italia's latest cover material offering supreme durability - Ti 316 7mm rails are hollow titanium, a balance of strength and lightweight - Dimensions: 248x155mm - 234g

A versatile short-nose gravel-specific saddle with a combination of a ride-compliant, carbon-reinforced nylon shell and Kium hollow rails. A ride-compliant, gravel-specific saddle with a short-nose design and generous ischial support for improved stability. GREATER STABILITY Where a traditional saddle shape encourages riders to shift their position frequently for better leverage, the Argo puts riders in a more planted position, making for greater stability and better weight distribution. The Terra Argo's short length allows riders to sit further forward without placing undue pressure on sensitive areas. It also features an ergonomic cut-out that was developed using detailed pressure analysis and input from medical experts. GRAVEL SPECIFIC SADDLE The Argo is our most versatile saddle shape, with each version suited to different riding styles. As the gravel-specific option, the Terra Argo has been engineered with a compliant shell to offer a certain degree of flexibility. This controlled elasticity absorbs road chatter and vibrations, delivering the comfort needed for long distance riding over unpaved roads. STABILITY AND RESPONSIVENESS To better support the Terra Argo's flexible shell, we used our closed-loop Mobius rail system for increased structural stability and responsiveness. The Terra Argo features a waved profile to provide the lower-back support necessary for long rides and to help riders hold their position while climbing on loose terrain. The same goes for the dropped-nose design which allows riders to rotate their pelvis while pushing forward on the nose for better traction and power transfer. LONG DISTANCE COMFORT The padding is made from fizik's proprietary Type-2 foam formulation, slightly thicker around the ischial sit bones area to support a more upright riding posture. The cushioning is slightly softer and more progressive than the type we use on our racing saddles, providing more long-distance comfort. - Argo: versatile short-nose saddle that encourages stability and relieves pressure on sensitive areas - X3: A combination of a ride-compliant, carbon-reinforced nylon shell and a Kium hollow rail with a high strength-to-weight ratio - Mobius Rail: Closed loop design for added strength and weight distribution - Wingflex: The shell's side edges flex and adapt to a rider's inner leg movement - Type 2 foam: Progressive cushioning, with a lower compression modulus - Terra: All-terrain series designed to take you beyond your boundaries - Intended use: Gravel - Concepts: This is a product of the fizik Concepts program, a cross-disciplinary collaboration of leading industry experts and academics carrying out research and analysis on technology, design, physiology and bike-fitting in search of ways to improve cycling performance. - Length: 270 mm - Height at 75mm width: 47 mm - Rail: 7x7 mm

- Low profile shape allows for easy weight shifting - Blunt nose maximizes usable climbing space - Flexible spined base and dynamic profiling for comfort on long rides - Superlight foam padding

Specialized's ultra-light S-Works Power saddle is Body Geometry designed for both men and women to have top performance in a more aggressive position. Proven through blood-flow testing and pressure mapping, the extra-wide and elongated Body Geometry channel and proper sitbone support allows for all day comfort. - Patented Body Geometry design is lab tested for both men and women to assure blood flow to sensitive arteries - Stiff FACT carbon fiber shell tuned for support and ride compliance - Super-light PU padding for comfort and support on longer rides - Ultra-light and strong oversized FACT carbon rails - Tough, light and water-resistant cover - Level 1 padding: Lightest level of padding; most direct connection to the bike - SWAT compatible mounts co-molded into the saddle base allow for sleek and integrated storage solutions - Weight: 143g (143mm), 155g (155mm)

- Designed in collaboration with Brandon Semenuk, the Overture is used by more pros than any other slopestyle saddle. - Tailored to the needs of the slopestyle, dirt-jump rider, the Overture is designed to compliment trick variations by being grip-able, pinch-able yet slim and easy to move around. - Brandon's design features a silicone print pinch area with subtle flares in the rearward body to compliment leg-pinch and no-hand tricks. - A lot of people also run this on their DH rig.

Leave it up to Brooks to improve on a classic. The B17 Imperial features a design that dates back to 1890, with a pressure reducing cutout that ensures your comfort in the miles to come. And, of course, the B17 Imperial features Brooks' full-grain, premium leather, and trademark rivets for the ultimate in comfort, style, and durability.

The weight-optimized 611 Ergowave Carbon was designed to precisely accommodate the requirements of off-road cycling and perfectly meet the demands of All Mountain and Enduro use. At just 150g, it's the lightest 611 in the Ergowave family. The wave-like shape and raised rear section provide perfect rearward support and an optimal pressure distribution which reaches deep into the body structures to result in improved power transmission. The lowered nose, in combination with the dip, provides optimal pressure relief for the perineal area. For even more pressure relief, especially on long technical climbs, the saddle nose of the 611 was made approximately 4mm wider than that of the 612, but just as flat and with the largest possible surface area. The padding was designed for the specific needs on the MTB with better dampening properties than the 612 making it perfect for rough off-road terrain. Additionally, a premium quality Kevlar material protects the saddle in the exposed places.

Take a seat. Comfy makes happy, perfect for everyday with a quilted saddle top keeps things plush. Where it thrives: Leisurely rides, in town What it's built for: Comfort, durability Highlights: - Quilted saddle top for comfort and style - Steel rails for strength and durability 170mm width

Ergon’s SR Sport Gel is the company’s breakthrough innovation in a women’s specific road bike saddle design. It’s shape and relief precisely fit the female anatomy in the rocked-forward position that is experienced on the road and gravel. The soft-tissue and seating area is noticeably more comfortable due to the ergonomically placed gel inlays.

Specialized's ultra-light Power Expert saddle is Body Geometry designed for both men and women to have top performance in a more aggressive position. Proven through blood-flow testing and pressure mapping, the extra-wide and elongated Body Geometry channel and proper sitbone support allows for all day comfort. - Patented Body Geometry design is lab tested for both men and women to assure blood flow to sensitive arteries - Stiff, carbon-reinforced shell for longevity and all-day riding efficiency - Lightweight and supportive PU padding for comfort and support on longer rides - Lightweight and durable hollow titanium rails - Tough, light and water-resistant cover - Level 2 padding: Medium density foam; bike feel with additional cushioning - SWAT compatible mounts co-molded into the saddle base allow for sleek and integrated storage solutions - Size 130mm / Weight 230g - Size 143mm / Weight 233g - Size 155mm / Weight 235g - Size 168mm / Weight 238g

Electra's Ergo Saddle gives you the support and comfort you need to cruise all day. Its plush padding is paired with a soft Lycra insert and shock-absorbing elastomers to smooth out even the roughest roads.

- The Next Evolution in comfort, high performance, and affordability - Constructed of brand new, fully recyclable, one-piece green-tek material, this saddle provides the best possible impact on your wallet and the environment - FeC Alloy rails - 299g - Selle Italia idMatch L3: W 145mm, L 245mm

Add Selle Royal comfort to all of your rides with their Gel Seat Cover. Added on top of your bike's seat, it cushions and eliminates pressure with Selle Royal's RoyalGel and elevated textile patches. This cover fits most exercise bikes at the gym, too, so you can enjoy all your workouts.

- Trail inspired and designed to support the rider equally well on uphill and downhill - A slight kick-up in the back for uphill, and added lower back support - Adaptive edges in high friction areas, also contour to rider’s personal shape and movement - Reinforced Impact Zones - Pronounced Relief Channel Features - Co-molded Construction, Anatomic Race Inspired Profile, Tuned Flex Points and Contact Edges, Reinforced Impact Zones - Material (Upper): 3D co-molded foam - Material (shell): Fiber-reinforced polymer - Material (rail): Hollow Chromoly - Length: 265mm - Width: 144mm - Weight: ±280g

- Hollow Cr-Mo rails - 280mm length x 140mm width - High Quality EVA foam - Kevlar sides - Synthetic cover - 241 grams - Intended Use: Downhill, Enduro, All Mountain

Seated pressure relief for male road cyclists in a lightweight carbon package. Flat contour, yet still comfortably padded. The overall shape and the relief channel with its deep cut-out perfectly match the male anatomy in a low, forward-tilted riding position typical of road cycling. The highly sensitive perineal area is effectively unloaded, preventing any discomfort. OrthoCell-Inlays in the seating area generate the best possible pressure distribution. The innovative OrthoCell material ensures maximum reset forces and is also more durable and lighter than gel. - Lightweight at only 195 grams (size S/M).

The Ergon SM E-Mountain Pro is the performance oriented saddle tuned for the athletic E-MTB rider. With a wider, flat nose and an upturned tail, this saddle provides the necessary support for long, steep seated climbs. - Gender-specific relief zones accommodate the unique anatomical differences between men and women cyclists - OrthoCell inlay; lighter and more durable than gel, ensure maximum comfort and support - Minimal, yet supportive padding delivers trail feedback without compromising comfort

- 3D reactive damping reduces shock and vibrations - Relief channel for perineal area comfort - Ergonomic BASF Infinergy core absorbs road shock, vibrations and reduces stress on lower back - Not rated for MTB use

For long-distance fans, this classic model combines superior strength with advanced ergonomic technology. The special padded design features an extra neoprene layer to encourage correct posture, while the elongated SuperFlow cutout relieves pressure for long-lasting comfort. - Rail: TI 316 Tube 7 mm - Cover: Fibra-Tek - Category: High-performance - Dimensions: 282 x 138mm / 282 x 149mm - 288g (138mm) / 293g (149mm)

Shorter—Narrower—Lighter—Faster. The 612-R offers more performance based ergonomics from 150 g. The raised rear gives more grip and better power transmission. A big advantage on straight roads and especially uphill. The stronger narrower mid-section and the narrow saddle nose gives more legroom. The proven SQlab ERGOWAVE form relieves the soft tissue area and prevents energy-consuming bad posture. The saddle shell is weight and flex optimized down to the last detail. More longitudinal stiffness and perfectly coordinated material flex to the side mean more comfort with less weight at the same time. The cover is extremely light but also abrasion-resistant and non-slip. The padding is closed-cell and strongly minimized. The comfort comes from the shape and the flex behavior between rail, shell and foam, which is coordinated as an overall system.

- Short nosed saddle that provides a more aggressive riding position - Cut out assists in eliminating pressure - Water resistant and reflective logos make the saddle both safe and durable

- Rail Material: Titanium - Clamp Style: Standard Rails - Material: Synthetic - Length: 250mm - Width: 146mm - Weight: 194g

Settle in for a comfortable ride experience. Without sacrificing performance, the Comp Streem Saddle features Ritchey's revolutionary patented Vector Wing technology, which helps eliminate hot spots by dissipating pressure more evenly for all-day comfort wherever your pedal strokes take you. With steel rails, a more slender nose, and medium padding, the Comp Streem employs a low-profile design and features a synthetic leather cover. - Saddle Dimensions: 278 x 145mm - Lightweight foam - Patented Vector Wing structure - Rails: Steel - Rail Dimensions: 7x7mm - Shell: Nylon + glass fiber - Cover: Synthetic leather - 250g (132mm)

Settle in for a remarkably comfortable ride experience. Without sacrificing performance, the WCS Carbon Streem saddle features Ritchey's revolutionary patented Vector Wing technology, which helps eliminate hot spots by dissipating pressure more evenly for all-day comfort wherever your pedal strokes take you. The WCS Carbon Streem enjoys a low profile design and narrow, carbon fiber-injected shell for stiffness and light weight, along with carbon fiber rails, super light foam padding, and a Microfiber cover. Notes: - If used in conjunction with our SuperLogic or WCS Carbon 1-Bolt Seatposts, you will need the 8x8.5mm Carbon Clamp Kit - If used in conjunction with our WCS Alloy 1-Bolt Seatposts, you will need the 8x8.5mm Alloy Clamp Kit - Saddle Dimensions: 278 x 145mm - Superlight foam - Patented Vector Wing structure - Rails: Carbon fiber - Rail Dimensions: 8x8.5mm - Shell: Nylon + carbon - Cover: Microfiber - Available in black or white - 145g (132mm)

The Skyline is the newest addition to the Ritchey saddle lineup and features carbon rails, an ergonomic curve that supports the sit bones, and a generous cutout to relieve perineal pressure. Its curved, two-axis shape features a rise towards the rear of the saddle and some rise into the nose of the saddle, making this shape ideal for riders who lack flexibility and want more support. - Vector Wing design - Dimensions: 277x147mm - Rails: carbon fiber - Rail dimensions: 8x8.5mm - Shell: Nylon + carbon fiber - Padding: superlight polyurethane foam - Cover: premium Ritchey synthetic upper - Weight: 184g

The 611 Ergowave S-Tube Saddle was designed to accommodate the requirements of off-road cycling and perfectly meet the demands of All Mountain and Enduro use. The wave-like shape and raised rear section provides perfect rearward support and an optimal pressure distribution which reaches deep into the body structures for improved power transmission. The lowered nose, in combination with the dip, provides optimal pressure relief for the perineal area. For even more pressure relief, especially on long technical climbs, the saddle nose of the 611 was made approximately 4mm wider than that of the 612, but just as flat and with the largest possible surface area. The padding was designed for the specific needs on the MTB with better dampening properties than the 612, making it perfect for rough off-road terrain. Additionally, a premium quality Kevlar material protects the saddle in the exposed places. The saddle rails on the non-active versions have been placed slightly closer together to allow for a more flexible shell which mimics the SQlab active technology and allows the saddle shell to follow the biomechanical motion when pedaling. This results in increased comfort, mobilization of the spinal discs, and reduced pressure to the sit bones.

The OZ seat features a proprietary pivotal base which provides extra strength while concealing the pivotal ratchet for a clean look. - 100% polypropylene base - Custom-developed shape and base construction - Designed by Eclat - Faux-leather top cover - Weight: 340g

End your seat discomfort by installing a Serfas Gel Saddle Pad. Thanks to super-plush gel, this sweet cover provides a level of comfort you have to feel to believe. Plus, it features easy drawstring installation, which means you can quickly move it between bikes if you ride more than one. There's no easier way to upgrade your bike and ride more comfortably. • Deep Groove for Increased Blood Flow • Gel For Increased Friction Protection • Easy Drawstring Installation

Elegant, slight curves accentuate this inviting shape that redefines what comfort is capable of at such a low weight. From where the pavement ends, to B-road pursuits and cyclocross run ups, our SL8 saddle provides irrefutable comfort in a minimalist, svelte package. - Narrow, tapered nose and midsection minimize chafing during longer pedaling sessions - Short overall length for seamless on-off transitions - Thin, lightweight padding keeps the overall weight down - Cromoly rails

- With the same shape as the Bel-Air V3 Max, this is sure to be a super comfortable option. Traditional sealing methods and a proven choice for comfort - Exaggerated Rear Rise – Increases stability and power transfer. Excellent for E-Bike applications to help riders stay planted on saddle from the additional torque. - Ample EVA Foam – Comfortable, durable and lightweight EVA foam is utilized in an ample thickness to ensure maximized comfort. - Nylon Glass Base With Bridge - Increases power transfer - Deep Peri-Canal - Continuous relief channel from tip to tail - Nose Platform - Wider nose to aid in climbing

Comfort and performance within everyone's reach. The ST5 Flow is the perfect saddle for those looking for the right balance between performance and comfort on a daily basis. The Gel inserted inside the padding, together with the central hole, relieves pressure from the perineal area and maximizes comfort. The practically flat shape, on the other hand, ensures the same high level of performance as a racing saddle. Hi-Viz inserts on the back ensure visibility and safety at night. - Flow anatomic cut-out reduces perineal pressure - Gel padding ensures comfort by adding flexibility in the center of the saddle and absorbing vibrations - Hi-viz reflective inserts on the back improves visibility and safety. - Soft-Tek cover, made from a special molded polyurethane, guarantees high levels of comfort - FeC alloy rails, made from high-strength and flexible carbon-iron steel alloy - Selle Italia idmatch S2 / L2 - Dimensions: 276 x 155mm / 276 x 165mm - 396g (155mm) / 403g (165mm)

Prologo's Choice Max Saddle sports Prologo’s sweet C-Max 11.0 top that's cushioned for awesome comfort and support whether you’re going for a short jaunt or conquering epic century rides. Plus, the Max’s unique perforated top provides exceptional ventilation to keep you cool and dry mile after mile. And, Prologo's polyamide base slightly flexes for even more compliance and comfort. You also get Prologo's vibration-damping and featherweight Ti 1.4 rails.

The Juniper LTD is a performance-oriented women's saddle with a firm, sleek, medium-profile platform. Widely considered our most comfortable saddle by women and men alike, the wide nose provides friendly contact in technical maneuvering situations. The Juniper LTD has all the same features as the original Juniper, with limited edition graphics, colors and materials. - Top: Seamless Synthetic - Rails: Gold Chromoly (Goldhide) / Black Chromoly (Metallica) - Length: 269mm - Width: 141mm - Weight: 282g

The ultimate bike seat for men, tested and highly praised by journalists, raced on by pro riders, ridden and universally loved around the world. Introduced in 1999, the Italian-made Fly was a joint project between Terry and Selle Italia to develop the ultimate in a comfortable, performance-level saddle for men. The Fly Ti is flat across the top and more padded than your typical euro-style racing saddle with complete cutaway and precision-sculpted foam to relieve pressure against sensitive anatomy. You know you need it. - Black textured-leather cover wears beautifully over time and keeps you solidly in position - Center cutaway with rear relief channel reduces contact points with soft tissue areas - Flat across the top with multi-density, injection-molded foam that's a bit stiffer in the rear for more power while pedaling - Length x width: 277mm x 140mm - Weight: 240 grams; 8.5 ounces - Rails: Ti-316 - Note: Check seatpost for compatibility as it may require an adapter kit (available from some seatpost manufacturers)

The saddle of choice for Pantani, Ewan, and van der Poel just got even better "Boost" short nose improves thigh clearance, saddle fit and reduces weight Flat shape with no cutout for a classic feel Carbon rails and Fibra-Tek cover for uncompromising performance

Another great value in the Terry line, the Butterfly Cromoly Gel takes comfort up a level with the addition of a thin gel layer along the top of the saddle. For two decades, Terry has been designing and testing saddles with female athletes, distance riders, and recreational cyclists. Introduced in 1999, the Italian-made Butterfly represents the best in all that research and development. A wonderful saddle for endurance/distance riders, the Butterfly Cromoly Gel is wider in the rear than typical race saddles for good support of a woman's sit bones; completely cut away through the nose and mid-section, making it flexible and comfortable against soft tissues; low profile, flat top with multi-density injection molded foam that's a bit stiffer in the rear for more power while pedaling; cromoly steel rails. - Smooth Dura-tek cover with printed accent - Thin gel layer along the top of the saddle provides an additional level of comfort - Length x width: 262mm x 155mm - Weight: 345 grams; 12.2 ounces - Rails: FeC alloy

Light, supportive and comfortable, Specialized's Women's Ruby Expert Saddle is a great upgrade for your bike. It features a carbon-reinforced shell with an Adaptive Edge base, a women's-specific shape and Specialized's Body Geometry technology for premium ergonomics and maximum comfort. It also boasts ultra-light foam padding and hollow-titanium rails to keep the weight down. What's more, the Ruby is available in three widths so you can get a perfect fit.

Designed for optimal fit and performance, the MSW Hustle Saddle offers dependable support for your sprints down rural roads and bike paths as you push past your personal limits. - Comfortable, high-density foam padding - Soft-touch cover - Chromoly rails - Clamp Style: Standard Rails - Material: Synthetic - Length: 280 mm

A wider center cutaway and the addition of gel along the top are the primary differentiators between this saddle and our classic Butterfly. The wider relief channel, combined with its contoured rear and thin gel layer, makes the Butterfly Ti Gel + extremely comfortable and ideal for endurance riders. Like all Butterflies, the Ti Gel + shares the basic construction characteristics. It's wider in the rear than typical race saddles for good support of a woman's sit bones. The top is flat and low profile, and we've used the ideal blend of stiffness/softness in the injection molded foam to allow for good support and power while pedaling. Outfitted with lightweight ti rails and hand made in Italy. - Leather cover with perforated Butterfly pattern - Thin gel layer along the top of the saddle provides an additional level of comfort - Widest cutaway in the Butterfly line-up for maximum pressure relief - Length x width: 262mm x 155mm - Weight: 255 grams; 9 ounces - Rails: Ti-316

Deity's collaboration with global saddle leader SDG Components. An SDG base topped with a Deity foam mold, the Speedtrap uses the highest-quality mid-density EVA foam for resilient durability, a soft synthetic cover for minimal wear, and high-end Kevlar sides to protect your seat while giving you the grip where you need it. - Hollow chromoly rails - Highest-quality mid-density EVA foam - Highest-quality Kevlar sides with embossed synthetic cover - D2 edge flex - provides softened edges for optimal pedal strokes - Length: 280mm - Width: 140mm - Weight: 241g

The Juniper is a performance oriented women's saddle with a firm, sleek, medium-profile platform. Widely considered Chromag's most comfortable saddle by women and men alike, the wide nose provides friendly contact in technical maneuvering situations.

The Volt is our most popular mountain saddle. Shaped for speed and comfort, time tested and proven, the Volt makes for an incredibly versatile saddle that has gained endless acclaim among riders. - Medium padding thickness and subtle curves make the Volt our most popular mountain saddle - An upward curved tail and gentle drop to the nose provide something to push against while pedaling - Carbon rails 7mm x 9mm

Anatomic Relief Lift Bike Saddle The A.R.S. Lift bike seats are all about comfort, comfort, and a little bit more comfort! Planet Bike's Anatomic Relief design is enhanced with Lift technology. The cambered cushion design reduces pressure on your sit bones. The ergonomic form is supported with gel and foam padding and dampening inserts to maximize comfort, soften road vibrations, and decrease pressure on soft tissue areas. The Lift handle gives you a great hand hold to more easily pick up and move your bike. The ARS Lift bicycle saddles are designed for recreational, leisure, and E-Bike cyclists looking for a wider platform and extra cushion and shock absorption. There is no reason to be uncomfortable on your bike! - Electric Bike Compatible: When you're riding your e-bike, you spend most of the time pedaling in a seated position, even when riding uphill. As a result, we designed the A.R.S. with e-biking in mind. - Camber Cushion ergonomic design reduces pressure on your sit bones and provides comfort for seated pedaling - Targeted Padding: Gel and foam padding added to sit bone area for enhances shock absorption and comfort for city riding, trekking, commuting, Electric, and leisure - Soft Tissue Relief: The nose of the saddle is designed to comfortably relieve pressure - Steel rails - Dampening Inserts built into the shell of the saddle help reduce impact and vibration - Lift Handle: Integrated into the underside of the saddle, the handle allows for easy parking and moving of your bike. Especially convenient for heavier e-bikes. - Weather-resistant cover with abrasion-resistant side panels - Weight: 631 grams (210) / 581 grams (175) - Seat Size: 265mm x 210mm (210)/ 275mm x 175mm (175)

Planet Bike's Comfort Classic Saddle combines incredibly soft padding with an anatomical shape and a center recess for excellent comfort, a plush ride and miles of smiles. Its sleek profile provides superb support, too, and it has a water-resistant and durable vinyl top.

Do you live an active lifestyle? On longer bike rides you value the best seating comfort? Then the ergonomic Ergon SF Women saddle should not be missing from your bike! Our new fitness saddle ensures that your cycling enjoyment is not clouded by saddle problems. A perfect balance of sportiness and comfort, the SF Women distributes pressure evenly, which is an added bonus on longer rides. To avoid the common female discomforts and numbness, the anatomically adapted relief channel in the center of the saddle removes pressure from the sensitive soft tissue areas. In addition, the shape and high-quality padding of the saddle are adapted to the position of the upper body during sporty cycling and provides optimum support of the sit bones. -Aids in achieving your fitness goals -Prevents female discomforts and numbness -Sporty and comfortably padded

A lightweight railed saddle with added durability that can take on anything from the track to the trail due to its composite web design. - Carbonite composite shell construction - 7mm hollow chromoly rails - Ergonomically sculpted shape - Rail Material: Chromoly - Clamp Style: Standard Rails - Material: Composite - Length: 238mm - Width: 126mm - Weight: 175g

Classically sprung and with a shape vetted by generations of cyclists, Brooks' Flyer S is prepared to go the distance. The Flyer S features a women's specific form, and the two rear springs make flying over rough pavement or dirt roads a joy. This saddle is a favorite of long-distance tourists and city-bound commuters alike. And, of course, the Flyer S features Brooks' full-grain, premium leather, and trademark rivets for the ultimate in comfort, style, and durability.

TEMPO ARGO R5 is a versatile endurance road saddle with a short-nosed design and generous ischial support that encourages stability. Where a traditional saddle shape encourages riders to shift their position frequently for better leverage, Argo puts the rider in a more planted position, making for greater stability and better weight distribution. Tempo Argo's short length allows the rider to sit further forward without placing undue pressure on sensitive tissues. It also features an ergonomic cutout that was developed using detailed pressure analysis and input from medical experts. Argo is our most versatile saddle shape and each version suits different riding styles. As the endurance riding option, Tempo Argo has been engineered to deliver a riding feel that suits the balanced geometry of today's all-purpose road machines. The padding is made from fizik's proprietary Type 2 foam formulation, slightly thicker around the ischial sit bones area to support a more upright riding posture. The cushioning is slightly softer and more progressive than the type we use on our racing saddles, providing more long-distance comfort. Argo is a product of the Fizik Concepts program, a cross-disciplinary collaboration of leading industry experts and academics carrying out research and analysis on technology, design, physiology, and bike-fitting in search of ways to improve cycling performance. - Tempo: Versatility road series designed for the most enjoyable riding experience - Argo: versatile short nose saddle that encourages stability and reliefs pressure on soft tissue area - R5: a combination of a ride compliant carbon-reinforced nylon shell and an S-Alloy rail - Wingflex: the shell's side edges flex and adapt to rider's inner legs movement - Type 2 foam: progressive cushioning, with lower compression modulus - Tempo Argo R5 regular 150mm - endurance cycling bike saddle SPECIFICATIONS: TEMPO ARGO R5 150mm - Length: 260mm - Width: 150mm - Weight: 241g - Height at 75mm width: 45mm - Length from nose to 75mm width: 103mm - Rail: 7 x 7mm - Tempo Argo R5 large 160mm - endurance comfortable road cycling saddle SPECIFICATIONS: TEMPO ARGO R5 160mm - Length: 260mm - Width: 160mm - Weight: 247g - Height at 75mm width: 45mm - Length from nose to 75mm width: 103mm - Rail: 7 x 7mm

Slender, lightweight design, great for Mountain and Road - Pressure relief channel, high-density padding, supportive shape, contrast stitching - CH5231 features 3M hi-visibility reflective panel on rear of saddle

The new 6OX Infinergy Ergowave active saddle utilizes BASF Infinergy cushioning (the same material used in running shoes). This material is very robust and brings comfort to a whole new level, especially in off-road conditions, due to its quicker recovery - The cover is not pulled over the entire surface of the saddle as in classic saddles. There are only "tapes" in the important places - Active design offers dampened lateral tilt which allows the saddle to follow the biomechanical movement of the pelvis on each pedal stroke

- I-Beam: fiber composite single mono rail design for superior weight to strength ratio, with the widest range of adjustments - Low profile nylon glass fiber base for unsurpassed strength - Rear Buzz-Cut cut out for increased tire clearance - Microfiber top with protective Kevlar side panels, lightweight EVA foam padding - Requires SDG I-Beam specific seatpost