Parts & Accessories

Windproof cycling shoe covers. When the mercury really drops, keep your toes toasty with our windproof and warm Blitzen cycling shoe covers. The windproof outer layer takes the bite out of the wind and the neoprene inner layer holds in the heat.

Body Geometry Footbeds are ergonomically designed and scientifically tested to increase power, endurance, and comfort by optimizing hip, knee, and foot alignment. With three different arch support options (Red+ being the lowest, Blue++ being in the middle, and Green+++ being tallest), you can be sure that every precious watt is preserved through the pedal stroke. - Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot. - Customized longitudinal arch and metatarsal support with Red+, Blue++, or Green+++ contour. - Proprietary lightweight foam avoids taking a compression set for long-lasting performance. - Combine Body Geometry shoes, footbeds, and wedges to maximize performance benefits.

96% Nylon, 4% Lycra The original DeFeet shoe cover is designed to be worn over road cycling shoes with cleat systems, providing an extra barrier against windchill and dirt. A three-season product for cool to cold conditions in damp or dry weather, Slipstreams feature a knit-in cleat guide to cut your own opening.

The Sidi C-Boost SRS Toe Inserts are high-performance components designed to enhance the durability and grip of cycling shoes. Specifically engineered for the Sidi SRS sole system, these toe inserts provide additional traction and protection, especially during off-bike sections or walking. Made from durable materials, they offer reliable support and longevity, ensuring long-lasting performance even in challenging conditions. Ideal for cyclists seeking enhanced stability and durability for their Sidi cycling shoes.

If you're looking for one shoe cover to provide the most warmth for the harshest of conditions, then look no further. Good news! Your search for the perfect foul weather shoe cover is over! Introducing the Garneau Thermal H2O Shoe Covers (some minor "assembly" required). This seam-sealed, 3mm super stretch neoprene, fleece-lined shoe cover is 100% wind and waterproof, and will keep your toes warm in the nastiest of weather! Its outsole is made out of rubber for additional traction, and can be cut to fit whatever type of cleat you have using the integrated cutting guide. We round it out with a seam-sealed zipper that tucks into a zipper garage and hits of reflectivity that offer additional visibility in low light conditions. Technical Details - Under Sole: Durable pre-cut rubber sole for better water resistance - Opening: Sean-sealed zipper for all weather conditions - Shoe Cover Fabric: super stretch neoprene laminated with fleece

The Sidi Tecno-4 Push System is an innovative closure mechanism designed for cycling shoes, known for its precision and convenience. Featuring a push-button release for quick adjustments, it allows cyclists to easily fine-tune the fit while riding. The system offers reliable support and even pressure distribution across the foot, enhancing comfort and performance. With its durable construction and user-friendly design, the Tecno-4 Push System provides cyclists with a reliable solution for achieving a customized fit for optimal riding experience.

Shot 2/Tiger 2 Double Tecno 3 Push System Half Pair from Sidi.

The Sidi Tecno-3 Push Short System is a cutting-edge closure mechanism for cycling shoes, known for its compact design and precise adjustability. With a push-button release for quick adjustments, cyclists can easily customize the fit while on the go. This system ensures even pressure distribution across the foot, enhancing comfort and stability during rides. Durable and user-friendly, the Tecno-3 Push Short System provides cyclists with a reliable solution for achieving a personalized fit for optimal performance on the bike.

Sidi Comfort Fit Insoles are designed to enhance the comfort and support of cycling shoes. These insoles feature a cushioned design that provides additional padding and arch support, reducing fatigue and discomfort during long rides. Made from high-quality materials, they offer superior durability and moisture-wicking properties, ensuring a comfortable and dry riding experience. Ideal for cyclists seeking enhanced comfort and performance from their Sidi cycling shoes.

Anti-slip heels are designed to enhance stability and prevent slippage while walking or standing. These heel attachments feature textured surfaces or rubberized materials that provide increased traction on various surfaces, including smooth floors and wet conditions.

The Sidi SRS Carbon Ground Inserts are premium components designed to optimize performance and durability in SIDI cycling shoes equipped with the SRS (Sole Replacement System). These inserts feature carbon fiber construction, offering lightweight strength and stiffness for efficient power transfer.

96% Nylon, 4% Lycra The original DeFeet shoe cover is designed to be worn over road cycling shoes with cleat systems, providing an extra barrier against windchill and dirt. A three-season product for cool to cold conditions in damp or dry weather, Slipstreams feature a knit-in cleat guide to cut your own opening. Features a reflective strip on cuff for additional visibility.

The classic must-have ELITE Thermal Toe Covers are updated with reflective logos. Features: - ELITE Softshell provides superior wind and water protection - Simple pull-on design - Reflective elements for low–light visibility - Recommended for road shoes with external cleats - Top: 70% nylon, 15% spandex, 15% polyurethane, Bottom: 93% nylon, 7% spandex, Imported.

The replacement heel pad is for all EC90 SLX, EC90 ACC and EC70 outsoles. These outsoles are found on Empire SLX, Empire ACC, Factor ACC, Factress ACC, Trans E70 and Espada E70 shoes. The kit comes with left and right replacement pads and includes hardware.

- Reinforced bottom and toe area for extra durability - Made from wind and waterproof latex to keep your feet warm and dry - Lightweight and flexible. No need for zippers or Velcro that cause leakage

- Windproof and waterproof materials keep your feet warm on cool morning or winter rides - Designed for temperatures down to 20 degrees in dry weather and 60 degrees in wet weather - Fastens easily with a snap under your shoe

Waterproof All Weather Cycle Oversock The original, 100% waterproof, ankle-length cycle oversock. Lightweight and streamlined, the Thetford is the ultimate oversock for cleated cycling footwear. Signature Aquasealz™ technology combines waterproofness with breathability, letting perspiration escape. Reflective detailing offers greater visibility at night. Polyester and nylon blend is soft and insulative, with a four-way stretch providing a close fit. The Thetford is the answer to non-waterproof cycling footwear, keeping feet aerated and dry. Outer – Nylon is extra durable and especially resistant to abrasion. Flexible and lightweight, nylon adapts to specific cycling cleats. Mid-Section – Aquasealz™ membrane is 100% waterproof and breathable, ensuring internal moisture does not build up in hat. Interior – Polyester and cotton lining is soft and warm, guaranteeing comfort wear after wear. Highly breathable and moisture-wicking. We want to inspire our community to stay outdoors longer. Thetford oversocks are fully waterproof, making cycling in wet conditions that little bit easier. Accessories are subject to rigorous testing before being put into production, guaranteeing the wearer complete protection against the elements. - Outer Layer - 93% Nylon, 7% Elastane - Middle Layer - Aquasealz® waterproof membrane - Inner Layer - 52% Polyester, 27% Cotton, 21% Elastane

- More performance - Less discomfort - Better power transmission Full speed ahead – optimize your performance to the pedals! The IP Pro Solestar ergonomically stabilizes your foot on road and mountain bikes, supports efficient and comfortable movement, maximizes leg power and reduces discomfort. The IP Pro Solestar was developed with internationally renowned insole specialist Solestar.

- Protect your mountain bike shoes from rain and mud while keeping your feet warm and dry - Designed to accommodate bulkier mountain bike shoes. Cleat holes are cut specifically for mountain bike cleats - Lightweight and flexible. No need for zippers

Your cycling shoes thanklessly accompany you through the toughest intervals in nature's worst conditions. Thank them and keep them ticking along with Specialized's Replacement Heel Lugs. These lugs replace the worn-out tread on your S-Works and Pro model road shoes. - Fits 2012 and earlier S-Works shoes - Fits all Pro Road shoes - Heel lug only - Sold in pairs; includes screws

- Hyper Green and Black is paired with unique reflective trims to drastically increase your visibility to motorists 24-hours a day. - Anti-abrasion knitted yarn was used to provide long-term durability. - Reflective band across the top increases your visibilty to motorists in low-light conditions. - Made for riding in transitional weather. - Two-hole cutout on the sole makes it compatible with road shoe cleats and walking pads.

Allows simple, removable, in-shoe adjustment to the forefoot varus/valgus angle for optimum foot, knee, and hip alignment. - Reversible shims work for right or left application - Vented for comfort - Package includes two varus shims (orange) or two valgus shims (yellow), based on selection

Mother Nature is always in flux, but mankind is both smart and adaptable. In other words, whenever she changes her mood, we always have the right tool for the job. And when that job is protecting against blustery, cold conditions, the right tool is our Deflect Comp Shoe Covers. Compared to our Element line of shoe covers, Deflect places more of a focus on wind resistance, so you'll find a stretchable construction with lightweight insulating properties. And to make getting in and out of the covers easy, we also included a rear zipper. - Deflect fabrics feature a good amount of stretch and a brushed back interior to ensure a light level of insulation. - Abrasion-resistant bottom and toe panels increase the lifespan. - A universal cleat opening makes these covers compatible with either road or mountain shoes. - Reflective elements - Rear Velcro closure

Replacement Boa® Snap 3 dials for S-Works 7 Road shoes. - Includes one cartridge dial assemble and lace. - Left- and right-specific.

Windy descent. Sudden downpour. Cold, high-elevation climb. Whatever the ride throws your way, our Neoprene Tall Shoe Covers keep feet comfortably pedaling onward. Stretchy high-cut neoprene and fully taped seams keep feet dry and protected in wet and windy conditions. Gravel or road ride, the universal cleat opening accommodates your preferred shoe type. For added durability, abrasion-resistant panels are strategically placed in high-wear areas to ensure these overshoes hold up year after year. - Fully taped seams prevent water intrusion to keep you dry and protected in wet conditions. - Zipperless construction for a comfortable fit around your ankles. - Abrasion-resistant toe and heel sole with universal welted hook-and-loop closure, so covers are compatible with both road and mountain shoes. - Fabric Content: 100% Polyester

From sprinkles to downpours, our Rain Shoe Covers are built to keep feet dry and comfortable in wet weather. Fully taped seams and a breathable Polartec® NeoShell® membrane seal out wind and water while also letting sweat escape, so feet feel fresh all ride long. Designed to fit snugly over cycling shoes, the four-way stretch material makes them easy to get on and off. - Fully taped seams prevent water intrusion. - Polartec® NeoShell® fabric is breathable, stretchy, and completely waterproof. - Abrasion-resistant toe and heel sole with velcro closure. - Fabric Content: 65% Nylon, 35% Polyester.

Comfortable elasticized shoe cover with rear zipper. - Made of elasticized Elastane for great comfort. Elastic band on the top opening and rear zipper - Reflective tape on the rear part, lateral S-logo print. - European sizes S (35-37) M(38-40) L(41-43) XL (44-46)

The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.

- More performance - More comfort - Also suitable for walking Misalignment of the feet can significantly limit the enjoyment of cycling. With the IP Touring Solestar, Ergon offers all touring riders a significant gain in comfort, especially when covering longer distances. The patented stabilization delta keeps the foot in an ergonomic position, prevents discomfort and optimally transfers leg power to the pedal. Efficiency is maximized with a grippy surface made of nylon fabric. Finely ground walnut shells in the 3D foam padding aid in a keeping the feet cool. The insole shell, made of fiberglass composite, enhances pedaling efficiency. The IP Touring Solestar was developed with the internationally renowned insole specialist Solestar.

If you've never experienced the pain of riding with ice blocks for feet, consider yourself lucky. For the rest of us, however, it's a feeling that we'd be happy to never experience again. But without pieces like our Element Toe Covers, history is doomed to repeat itself this winter. Soft Shell fabrics are synonymous with unrivaled protection and quality and this is for a good reason. It provides amazing levels of wind and water resistance, without sacrificing anything to breathability. This means that your toes are going to stay warm and protected, not wet and clammy. And with abrasion resistance at key points of the construction, you'll be receiving these warming advantages for seasons to come. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Fabric Content: Knit 44% Polyester, 38% Nylon, 14% Elastane, 4% PU. - Soft Shell fabric provides resistance to both wind and water, without sacrificing anything to breathability, comfort, or layering ability. - Universal cleat opening means that the covers are compatible with both road and mountain shoes.