Bottom Brackets

The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Compatible with Cannondale Ai frames - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard

External English (BSA) threaded bottom bracket for 73mm shells. Wheels Mfg uses only Enduro bearings and silicone seals for the most durable and smoothest bottom brackets available. Fully serviceable. Includes: (2) - Enduro Silicone dust seals (1) - 2.5mm aluminum BB cup spacers for use with 68mm wide BB shell (1) - 1.8mm aluminum BB cup spacers for use with 68mm wide BB shell (1) - 0.7mm aluminum BB cup spacers for use with 68mm wide BB shell (2) - 0.5mm crank spindle spacers (2) - 1.0mm crank spindle spacers (1) - Wave Washer Direct replacement for SRAM/Truvativ GXP bottom brackets! - Bearings: Enduro Angular Contact - Color: Red - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68-73mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: GXP (SRAM, Truvativ, Etc.) - Crank Spindle Diameter: 22/24mm - Weight: 116g

Run 29mm spindle SRAM DUB compatible cranks in a BSA threaded frame. Machined aluminum cups thread into a standard threaded frame and feature Enduro 6806/29 ABEC-3 sealed bearings outboard of the BB shell. Fully serviceable. Bottom Bracket Includes: - BB Cups with bearings - 2 x Silicone dust seals - 2 x 0.5mm crank spindle spacers - 2 x 1.0mm crank spindle spacers - 1 x 2.5mm crank spindle spacer - Bearings: Enduro 6806/29 ABEC-3 - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68mm, 73mm, 100m - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Diameter: 29mm - Tool Pattern: 48.5mm x 16-notch - Over Bearing Width: 91.5mm in a 68mm wide shell - Weight: 102g Compatible with the following Bottom Bracket Standards and SRAM DUB compatible cranks with 29mm diameter spindle: - ISO/English or BSA Threaded (1.37 in x 24 TPI) - 68mm, 73mm, and 100mm BB Shell Width (if used in a 100mm wide shell, install the cups without the center plastic center sleeve)

T47 threaded BB cups for T47 frames and 22/24mm spindle diameter SRAM GXP cranks. Cups have internal bearings and are typically used in BB shells with widths wider than 73mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells. Bottom Bracket Includes: - BB Cups with bearings - 2x Silicone dust seals - 2x 0.5mm crank spindle spacers - 2x 1.0mm crank spindle spacers - 1x 24mm ID wave washer Specifications: - Bearings: Enduro ABEC-3 - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width (mm): 68mm - 132mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Crank Spindle Diameter: 22/24mm - Over Bearing Width: 91.7mm in 86.5mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields - Tool Pattern: 48.5mm x 16-notch - Weight: 129g

Designed to work flawlessly with your Patterson crank, this Metropolis bottom bracket delivers smooth performance and light weight.

Campagnolo's Record Bottom Bracket Cups are perfect for your Campy Ultra-Torque crankset (sold separately). They are constructed from anodized aluminum for light weight and excellent durability. They are available in English and Italian thread. • Italian: 70mm • English: 68mm

Sealed and Delivered Bottom brackets are something you never think about until you do. With superior sealing and cable routing clearance, our 30mm Cinch BB92 will give you true peace of mind. This bottom bracket stands for precision and and durability. All About The Ball Bearings This BB uses 6806 retainer bearings packed with waterproof grease, along with improved wiper seals to ensure above-and-beyond durability and performance. Death to Creaks We fired up the ol' CNC machine to make sure the anodized alloy cups of this bottom bracket provide an exact, perfectly quiet fit in your frame. Weather, Or Not Features a built-in telescopic sleeve with improved sealing, keeping moisture from bearings and crank spindle. Plus, the sleeve provides more space for internal cable routing.

PF30 Threaded bottom bracket features two machined aluminum cups that thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Directly replaces all OEM PF30 bottom brackets. Note: Use only bottom bracket tools compatible with 16-notch, 48.5mm outer diameter cups. - Bearings: Enduro ZERØ Ceramic Hybrid - Color: Black - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB, BBRight™ Press Fit - Bottom Bracket Shell Width (mm): 61mm to 79mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: BB30 - Crank Spindle Diameter: 30mm - Weight: 106g

6061 CNC machined Alloy cups w/ Precision sealed bearings. - Bearings: 19mm mid sealed (x2) (with american cups) - Spindle: 19mm, 8 spline (included in kit) - Spacers: 6061 Alloy cones with 15/16"/19mm hat washer and 4x spacers included NOTE: These sealed American BB & American BB sealed upgrade kit (with 8-spline spindle) are designed to replace the 8 spline spindle and bearings of an unsealed American BB with a sealed version. Fits most complete bikes that come with unsealed American 19mm BB. 19mm Model does not come with a spindle.

A tough bottom bracket that will go as hard as you. The PowerSpline has a heat-treated chromoly 12 spline spindle to make sure it can go the distance with even the most demanding riders. SPECIFICATIONS: - BB-FRAME INTERFACE: English/BSA 68E/73mm, English/BSA 68mm, English/BSA 73mm - CHAINLINE: 46.0mm, 48.5mm, 51.0mm, n/a - SPINDLE LENGTH: 108mm Spindle, 113mm Spindle, 118mm Spindle - SUPPORT E-TYPE FD: n/a, Yes - CRANK-BB INTERFACE: Power Spline - BEARING TYPE: n/a - SPINDLE DIAMETER: n/a - CUP MATERIAL: n/a - WEIGHT (G): 363 - WEIGHT BASED ON: BSA 73mm, 113mm spindle

The game-changing DUB family goes ceramic. While DUB has been simplifying the game, eliminating compatibility frustration and confusion for years, the DUB ceramic bottom bracket gives riders an additional option for even more silky-smooth performance. This is a whole other level in bottom bracket friction reduction, thanks to its high efficiency, ceramic bearings. What's more, the DUB ceramic bottom bracket can help riders save precious rotational energy without sacrificing the kind of robust seals required for real MTB and road racing scenarios - High-efficiency ceramic bearings save riders rotational energy - Silky smooth, without sacrificing robust seals required for real-life durability MTB and racing scenarios - One oversized spindle to work across every bottom bracket standard - PressFit 30 (68-73mm) Road Wide Specifications: - Spindle Interface Type: SRAM DUB - Bottom Bracket Shell I.D.: 46 - BB Shell Width (mm): 68 - Defined Color: Black - BB/Frame Interface: PF30 - Weight: 120

The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Compatible with Cannondale Ai frames - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard

Compatible only with Record or Chorus square taper cranks. Features three cartridge bearings and a chromoly steel spindle. - 3 sealed cartridge bearings, 2 on the drive side, 1 on the non-drive side - Removable cups are machined from 7000 series aluminum - Unique taper is not compatible with Shimano - Weight: 220 grams

Features three sealed cartridge bearings. - Fits Daytona, Racing Triple, Centaur, Veloce and Mirage, 1193 and later Athena and pre-1995 Record and Chorus - 115mm spindle recommended for triple cranks and 32 or 35mm seat tubes - Unique taper is not compatible with Shimano - Weight: 233 grams

FSA (Full Speed Ahead) MegaExo 19 bottom brackets are for use with 19mm diameter spindles. - For Alloy Cranks with MegaExo 19 BB-AL86/19/SLE - Spindle Interface Type: FSA MegaExo 19 - BB Shell Width: 86mm - Bottom Bracket Shell I.D.: 41 - BB/Frame Interface: BB86

Tech specs: - BSA: 91g - PF30: 117g - BB86: 66g - BB386: 103g

The EVO386 standard is designed for oversized spindles. CeramicSpeed's kit for Shimano allows you to install Shimano or FSA cranks with 24mm spindles. The cups come with CeramicSpeed Bearings installed. Both CeramicSpeed Standard and Coated Bearings are available. Both utilize super smooth CeramicSpeed Balls and hardened-steel races. The latter has an additional metallic coating on the races to further smooth and harden the steel, further increasing life and lowering drag. The design of overlapping cups extending through the shell for EVO386 reduce the likelihood of creaking and increase the reliability of the system. The CeramicSpeed Standard Bearings feature an average drag reduction of 75% compared to stock bottom brackets. That translates into frictional drag of 0.3-0.4 watts per set, which is the result of great design, hardened-steel races, and ceramic balls that are 100% smoother and 15% harder than the ceramic competition. The CeramicSpeed Coated Bearings are a step up as they reduce drag by 50% compared to our Standard Bearings and an improvement in bearing life by 60%. All Round Grease comes standard in the bearings, but can be replaced for lower drag TT and Track Grease or higher durability LongLife Grease, which adds a bit of drag but stays in the bearing when riding through messy conditions. In The Box: - 1 bottom bracket with bearings installed - 2 dust covers - 10ml syringe of All Round Grease - Sticker Sheet

Wheels Mfg solution for running a 30mm spindle crankset in a BSA threaded frame. Machined aluminum cups thread in to a standard threaded frame and feature Enduro 6806 ABEC-3 sealed bearings outboard of the BB shell. Fully serviceable. Notes: - For use with BB30 Wide 30mm diameter cranks with a spindle length of at least 104mm. - Will not work with standard BB30 cranksets. PLEASE MEASURE YOUR BB30 CRANK SPINDLE LENGTH! - Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29). - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: BB30 Wide, BB30a, 386EVO, Rotor 3D+, SRAM BB30 Wide - Crank Spindle Diameter: 30mm - Crank Spindle Length: At least 104mm - Weight: 100g

Rock The BB Precise fit, smooth-rolling operation, long-living performance–what more can you ask for from a bottom bracket? Install a 30mm CINCH crankset friendly PF30 and get riding...and keep riding. Rolling deep The PF30 bottom bracket uses reliable 6806 retainer bearings packed with waterproof grease, along with wiper seals to keep the gunk out. Close Enough Won't Cut It We fired up the ol' CNC machine to make sure the anodized 30mm alloy cups of this bottom bracket provide an exact, perfectly quiet fit for your frame. Weather, Or Not All RF bottom brackets come with an inner plastic sleeve to keep the elements out and the appropriate spacers to ensure a perfect fit.

Wheels Mfg solution for running a 30mm spindle crankset in a BSA threaded frame. Machined aluminum cups thread in to a standard threaded frame and feature Enduro 6806 ABEC-3 sealed bearings outboard of the BB shell. Fully serviceable. Notes: - For use with BB30 Wide 30mm diameter cranks with a spindle length of at least 104mm. - Will not work with standard BB30 cranksets. PLEASE MEASURE YOUR BB30 CRANK SPINDLE LENGTH! - Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29). - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: BB30 Wide, BB30a, 386EVO, Rotor 3D+, SRAM BB30 Wide - Crank Spindle Diameter: 30mm - Crank Spindle Length: At least 104mm - Weight: 102g

T47 threaded BB cups to run 30mm spindle cranks on T47 frames. Cups have outboard bearings and are typically used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, or a titanium-compatible anti-seize compound in titanium BB shells. - Bearings: Enduro Angular Contact - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width: 68 – 100mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Over Bearing Width: 91.2mm in 68mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 44mm x 16-notch

The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life and simplifying maintenance. Enjoy smooth operation, fast bearing replacement, and no more creaking. - Bearings: Enduro Angular Contact (22/24mm SRAM non-drive-side bearing: ABEC-3) - Color: Black - Bottom Bracket/Frame Interface: Cannondale BB30A - Bottom Bracket Shell Width: 73mm - Bottom Bracket Shell I.D.: 42mm - Over Bearing Width: 91mm in 73mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 44mm x 16 notch

The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Compatible with Cannondale Ai frames - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard

The Hellbender70 bottom bracket utilizes a bearing made of 440C stainless steel, providing exceptional ride quality and reliability. The stainless steel bearing in the Hellbender 70 strikes a perfect balance between value and lasting performance. - 440C stainless steel bearings, dual lip seal, marine grease - Machined aluminum cups

The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Compatible with Cannondale Ai frames - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard

- Enables the use of a MegaEVO (30mm spindle) crankset on a 68mm English threaded frame - Compatible with Gravity Gradient MegaEVO 30mm cranks

- Simple and reliable square taper bottom bracket - Replaces both BB-UN26 and BB-UN55 - Sealed cartridge bearings - Cr-Mo axle - For bicycles equipped with a chain case, select BB-UN300-K - For E-type front derailleur compatibility, choose BB-UN300-E - Fixing bolts not included; Shimano FC-E6000 bolts suggested

These bottom brackets are equipped with hand-built coated bearings specially developed for off-road performance that offer extreme durability and feature a unique design for SRAM DUB 28.99mm cranks. Coated bearings utilize the highest-quality CeramicSpeed ceramic balls, running on hardened-steel races with a 3-micron-thick metallic coating that makes the races corrosion-resistant, harder, and smoother, increasing service life and reducing friction. - This product has a unique design specifically for SRAM DUB 28.99mm cranks - Native fit frame interface and no plastic adapters or excess spacers - This design features a custom integrated dust cover for maximum durability In the box: - 2 CeramicSpeed Bearings - 2 dust covers - Plast sheet - 1 x 3mm spacer - 2 x 1mm spacers - 10ml syringe of CeramicSpeed Long Life Grease - Sticker sheet

The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life and simplifying maintenance. Enjoy smooth operation, fast bearing replacement, and no more creaking. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: Cannondale BB30A - Bottom Bracket Shell Width: 73mm - Bottom Bracket Shell I.D.: 42mm - Over Bearing Width: 91mm in 73mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 44mm x 16 notch

The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard